POWDER COATING PRICING
At Epic Powder Coating, we offer high quality services at competitive prices. Some of our service prices are listed below. If you require something not listed below, please call us on 0448 878 355 for a free quote today.
MOTORCYCLE
Motorcycle Frames | $290 – $490 +GST
Motorcycle Rims | $150 +GST (Tyres and bearings need to be removed)
Swing Arm | $120 – $200 +GST
Triple Clamps | $70 +GST
Fork Sleeves | $60 +GST
Handle Bars | $60 – $120 +GST
Leavers | $20 +GST
Callipers | $65 +GST per piece
Exhaust | $220 – $270 +GST
CAR PARTS
Car/4x4 Rims | $175 +GST each (Tyres need to be removed)
Brake Callipers | $65 – $100 +GST per piece
Rocker Cover | $150 – $300 +GST
Subframe | $250 – $350 +GST
K frame | $350 – $450 +GST
Manifold | $220 – $250 +GST
Bull Bars | $500 – $600 +GST (up to 185cm)
Sport Bars | $280 – $380 +GST
Snorkel | $150 +GST
BICYCLE
Frames | $220 – $270 +GST
Forks and Handlebars | $80 +GST
Crankshaft and other small parts | $50 +GST
Rims | $60 +GST each (Tyres and bearings need to be removed)
GoKART
GoKart frames | $330 – $380 +GST
Rims | $60 +GST each (Tyres and bearings need to be removed)
HI TEMP POWDER
Available in satin black, titanium and silver
Hi temp coated exhaust | $250 +GST basting and coating
Hi temp coated headers | $220 to $260 +GST each depending on size and configuration
POWDER COATING SERVICES
With an oven designed for car and motorcycle rims we can fit any parts up to 1800mm in lengths. We powder motorcycle frames, swing arms, springs, rims, handle bars, engine covers, brake calipers, sewing machines, chairs, benches and much much more.
Our process for a superior, long lasting finish usually includes sandblasting, degassing, priming and top coating:
Hi TEMP POWDERS
Oxycolour Muffler Coatings are silicone powder coatings designed for use in high temperature applications. The pigments and resins create a performance coating able to withstand peak temperatures of up to 650°C (1200°F) and the repeated heating and cooling specifically of exhaust systems among other substrates.
Sand Blasting
Most parts are sandblasted to bare metal in order to get rid of any existing paint, rust, oxidation and dirt, but also to give the metal an etch to allow for a strong adhesion of the new coating.
Degassing
Degassing is a process we use for possible contaminated metal especially parts that are exposed to oil and grease. The metal will be burned in the oven up to 200 degrees (depending on the part/metal) which will get rid of any oil and gases in the metal to prevent bubbling when it's being powder coated.
Priming
Most parts are first powder coated with a primer for extra adhesion and extra protection against rust, oxidation, chemicals, UV etc for a long lasting finish.
TOP COAT
After the product has been fully primed we then apply the top coat(s). Sometimes that is a single coat and sometimes that is more than one coat, depending on the colour and special effect selection chosen by the customer for a beautiful finishing.
These steps will insure our customers will receive a finish product that is durable and beautiful.